Перейти к информации о продукте
1 из 9

Andonstar

Andonstar AD407 Pro 3D HDMI Soldering Digital Microscope

Andonstar AD407 Pro 3D HDMI Soldering Digital Microscope

Обычная цена $299.00
Обычная цена $359.99 Цена со скидкой $299.00
Распродажа Продано
Стоимость доставки рассчитывается при оформлении заказа.

AD407-Pro Basic Parameters

Image sensor: 4 Mega Pixels HD Sensor

Video output: UHD 2880X2160 24FPS, FHD1920X1080 60FPS/30FPS, HD1280X720 120FPS

Video format: MP4

Magnification Ratio: Up to 270X (27 inch HDMI monitor output)

Photo resolution: MAX 4032*3024 (12M 4032*3024)

Photo format: JPG

Minimum focus distance: 5cm

Frame Rate: Max 120f/s (under 600 Lux Brightness& HDP120)

Storage: Micro-SD card (not included), up to 64G

Power source: 5V DC

Stand size: 20cm*18cm*32cm

Screen size: 7 inch  

What's in the box: 

Base, Microscope Monitor, Beam, Column, HDMI cable, Power Adapter, UV filter (assembled), Remote, Wrench, Screw*2, Spring, Metal clip, Power cable, Users Manual

Просмотреть всю информацию

Customer Reviews

Based on 5 reviews
80%
(4)
20%
(1)
0%
(0)
0%
(0)
0%
(0)
A
Alim Kazandzhiev

Andonstar AD407 Pro 3D HDMI Soldering Digital Microscope

J
Juance
the best microscope!

and the best company andonstar!

T
Tony Meredith
After using it for a while I have the following comments on the AD407 Pro:

After using it for a while I have the following comments on the AD407 Pro:

1) You should supply a lens cap to protect the microscope when not in use.

2) Having the display and the microscope body together can be a problem, as using the buttons on the display shakes the microscope. It would be much better if the two were physically separate, connected by a cable. That would also allow the microscope to be moved and tilted in different axes.

3) The longer stand column is good but I do not see any point in having a separate height adjusting mechanism on the beam, especially as it only has limited range. There is already height adjustment on the column. I think you can simplify the entire beam assembly to make the unit simpler.

4) The bigger baseplate on the Pro model is Ok, but the baseplate is still quite small and should be even bigger to accommodate normal sized PCBs. Maybe it could be made in sections if transport box size is a problem.

5) The LED lamps are good, but as they always need to point down toward the PCB, why not make the head 90 degrees to the neck? That would also provide more flexibility in position as flexible length is lost at the moment in curving the lamp around to point downwards.

M
Mathieu Fillion
Vert nice

I love it

C
Christopher Finch

Andonstar AD407 Pro 3D HDMI Soldering Digital Microscope