Andonstar
Andonstar AD407 Pro 3D HDMI Soldering Digital Microscope
Andonstar AD407 Pro 3D HDMI Soldering Digital Microscope
Couldn't load pickup availability
AD407-Pro Basic Parameters
Image sensor: 4 Mega Pixels HD Sensor
Video output: UHD 2880X2160 24FPS, FHD1920X1080 60FPS/30FPS, HD1280X720 120FPS
Video format: MP4
Magnification Ratio: Up to 270X (27 inch HDMI monitor output)
Photo resolution: MAX 4032*3024 (12M 4032*3024)
Photo format: JPG
Minimum focus distance: 5cm
Frame Rate: Max 120f/s (under 600 Lux Brightness& HDP120)
Storage: Micro-SD card (not included), up to 64G
Power source: 5V DC
Stand size: 20cm*18cm*32cm
Screen size: 7 inch
What's in the box:
Base, Microscope Monitor, Beam, Column, HDMI cable, Power Adapter, UV filter (assembled), Remote, Wrench, Screw*2, Spring, Metal clip, Power cable, Users Manual









and the best company andonstar!
After using it for a while I have the following comments on the AD407 Pro:
1) You should supply a lens cap to protect the microscope when not in use.
2) Having the display and the microscope body together can be a problem, as using the buttons on the display shakes the microscope. It would be much better if the two were physically separate, connected by a cable. That would also allow the microscope to be moved and tilted in different axes.
3) The longer stand column is good but I do not see any point in having a separate height adjusting mechanism on the beam, especially as it only has limited range. There is already height adjustment on the column. I think you can simplify the entire beam assembly to make the unit simpler.
4) The bigger baseplate on the Pro model is Ok, but the baseplate is still quite small and should be even bigger to accommodate normal sized PCBs. Maybe it could be made in sections if transport box size is a problem.
5) The LED lamps are good, but as they always need to point down toward the PCB, why not make the head 90 degrees to the neck? That would also provide more flexibility in position as flexible length is lost at the moment in curving the lamp around to point downwards.
I love it
Andonstar AD407 Pro 3D HDMI Soldering Digital Microscope